Tensile Strength	ASTM D638	3243 psi (22.5 mpa) avg.
Elongation	ASTM D638	488% (avg.)
Hardness (Shore D)	ASTM D2240	53 +/- 5%
Hardness (Shore A)	ASTM D2240	96 +/- 5%
100% Modulus	ASTM D638	1100 psi (7.6 mpa) +/- 5%
300% Modulus	ASTM D638	1738 psi (12 mpa) +/- 5%
Tear Resistance	ASTM D 624	519 PLI (91 KN/m)
Service Temperature		-50oF – 200oF (-45oC-93oC)
Abrasion Resistance 1000g – 1000 cycles	ASTM D 4060	H-18 wheel        20.5 mg loss  H-10 wheel        33 mg loss  H-22 wheel        46.4 mg loss  CS-17 wheel      19.1 mg loss
Weather-ability	4000 hours (QUV-B)	No Evidence of Failure

 

Properties are approximate because of processing parameters, as well as add mixture types and quantities will change physical properties of cured elastomer. All samples for above tests were force cured or aged for more than three weeks.

Complete polymerization to achieve final strength can take up to several weeks, depending on a variety of conditions.

The Polyurea coating makes Versadeck decking a superior abrasion resistant coated aluminum decking product.